Search

Tilting sensed Rugged inclinometers and tilt sensors are offered by Axiomatic, which has a series of new low cost units that can measure ±90º degrees or 360 degrees angular rotation. The angles are measured by a two-axis MEMS sensor, which senses acceleration caused by gravity. In a tilt sensor application, an out-of-range state can be transmitted as one of its outputs. The latest AX06025X series features CANopen networking, an RS-232 port or three Voltage outputs for communicating the angular measurement.

Iran's congested capital Tehran is now benefiting from a new underground road tunnel that carries traffic under the city.

AN INNOVATIVE slurry wall solution has been used by Bachy Soletanche at the Alderley Edge By-Pass project in the UK. Bachy Soletanche provided assistance for the A34 Alderley Edge by-pass project in the UK being carried out by main contractor Birse Civils. This solution was required to tackle challenges posed by the water table at the Welsh Row section. Bachy Soletanche used its experience with slurry cut-off walls, a technique rarely used in Britain on road construction, to benefit a tricky section of the

A demolition contractor in the UK is broadening its operations with a new recycled aggregates business.

German-based construction equipment manufacturer Wacker Neuson is celebrating record annual revenue and earnings.

New software and hardware from Trimble provide movement monitoring capabilities for major structures New Trimble 4D control software offers users the chance to monitor movement of structures such as bridges and flyovers, using a combination of GNSS and optical technologies.

HIGHLY VISIBLE plastic lane marker posts from Pexco have helped boost traffic flow and safety for the Olympic Winter Games.

The first SAB-Gate supplied by Highway Care to the UK is now in use. The Balfour Beatty Mott MacDonald (BBMM) partnership installed the SAB-Gates at two strategic locations along the M4 and M5 highways, with approval from the UK's Highways Agency. The units, which are manufactured in Italy by Snoline, are now in place in the central reservation at Emergency Crossing Points. On a number of sites, BBMM is replacing the existing central reserve steel barrier with concrete step barrier (CSB) and this will requi

The American Road & Transportation Builders Association (ARTBA) is voicing opposition to a proposal from the Environmental Protection Agency (EPA) to tighten ozone standards.

UK company Aggregate Industries is now using a Super 1302-2 model paver from Vögele for on the island of Guernsey.

In the UK a civil engineering firm is using Wacker Neuson's novel vertical digging system (VDS) on a major contract to up-grade the motorway communication network alongside the M6. The Highways Agency contract involves work along a total of 64km between junctions 32 and 37 and McDermott Construction, together with sister company McFour, has been tasked by main contractor Peek Communications to open a 960mm deep x 410mm wide trench and install large termination boxes every 500m. The job involves bedding four

In Gibraltar, where the entire population lives on or close to the huge limestone rock that gives the nation its name, the issue of rock fall protection is taken very seriously. Here, a scheme to install a network of rock fall catchment fences has just been completed, which will allow the re-opening of a critically important road at the south-eastern end of the Rock, which was closed following a significant rock fall occurrence in 2002.

Iraqi capital Baghdad looks to benefit from a series of key road improvement works. A budget of nearly US$69 million has been allotted by the central government for the work.

Using a wider milling drum on certain applications has allowed an Italian contractor to boost productivity.

POLAND'S new A1 highway is the country's biggest road project at present and when complete, it will run 568km north to south from Gdansk to Gorzyczki, cutting the journey time from 10-6 hours. The project is a key one for Poland's economy and the highway will provide a vital new link for cross-country truck transport. This route forms part of the Trans-European Transport route connecting Norway with Greece, and work started in October 2005 on the first 100km phase, which was

Yanmar Europe is using INTERMAT to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, are at INTERMAT 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, c

UK QUARRY OPERATOR is now using a Sandvik hydraulic breaker for primary winning. This technique has been introduced to the operation to solve a face stability challenge and is being used instead of blasting. The 3.8tonne BR4511 was supplied by local Sandvik breaker dealer M&M Plant and is mounted on a Komatsu PC450-8 hydraulic excavator.

Volvo Construction Equipment believes its ascendancy in the Chinese market is behind its record annual sale of 84,000 machines in 2011.

A new wearing course applied by Bolidt on the entire eastern section of the Erasmus Bridge in Rotterdam is helping improve the surface for road users. The bridge forms an important link in the centre of the city of Rotterdam and using its equipment Bolidt was able to apply 3,000m2 of new wearing course on Erasmus Bridge in 4 hours. The Rotterdam authorities commissioned Bolidt again after the previous surface the firm applied, its Bridgedeck Up product, lasted over a decade. This time the work was carried o

CATERPILLAR is boosting its soil compactor range with the introduction of the CS44 and CP44 models. These machines are aimed at the 5.5-8tonne class and share many features with the proven 400ESeries Soil Compactors as well as the Production-Class range.