FRD produces Fx Series scaling breakers for tunnel construction
FRD produces Fx Series scaling breakers for tunnel construction
Furukawa Rock Drill (FRD) has developed the Fx Series of small hydraulic breakers with a scaling version for tunnel use. Using a mono-block cylinder with replaceable wear parts, the Fx Series breakers are said to provide increased power with reduced operating noise. There are four Fx models available with weights of 112-300kg, they are intended for excavators with operating weights of 1.5-7 tonnes.
February 8, 2013
Read time: 1 min
7140 Furukawa Rock Drill (FRD) has developed the Fx Series of small hydraulic breakers with a scaling version for tunnel use. Using a mono-block cylinder with replaceable wear parts, the Fx Series breakers are said to provide increased power with reduced operating noise. There are four Fx models available with weights of 112-300kg, they are intended for excavators with operating weights of 1.5-7 tonnes.
Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.
Hydraulic breaker manufacturer Montabert is launching a new medium range breaker for applications in demolition, roadbuilding, utilities and trenching. Weighting 730kg and working with a maximum input power of 33kW, it is said to offer exceptional power to weight ratio and is made for excavators from 8-18tonnes. The breaker features a completely new design with fewer parts and without tie rods, and provides a frequency of 870 blows/minute and can be used with excavators providing a flow range of 80-140litre
Palfinger Platforms has replaced its TKA series access platform with the P300KS. Mounted on a 7.5 tonne truck chassis, the P300KS has a working height of 30m with a maximum outreach to the side or the back of 20.5m. The cage, which offers 540 degrees of rotation, has a maximum load of 350kg.
